Eclat Lewis Mills Controller Bars
The new Eclat Lewis Mills signature Controller handlebars from Eclat come in 9.5 or 9.75" rise, standard 22.2mm or 25.4mm oversize clamp and black ...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
The new Eclat Lewis Mills signature Controller handlebars from Eclat come in 9.5 or 9.75" rise, standard 22.2mm or 25.4mm oversize clamp and black ...
View full detailsThe Hoder Sky High Bar from S&M with a 9.5 inch rise and madn-size 31 inch width, just in case the Hoder and Hoder High bars don’t get you high...
View full detailsBroc Raiford's new signature BROC bar is developed from the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width an...
View full detailsThe new Voyager bar is made from all thicker 13 butted 4130 CRMO heat treated tubing that was designed with all the butting in all the stress point...
View full detailsThe Shadow Conspiracy Odin Top Load Stem was designed with input from Mark Burnett, it is cold forged and CNC machined 6061-T6 Alloy. Mark specific...
View full detailsThe S&M Eduro V.2 is a strong, clean-looking top load stem with 34mm rise and a fork top cap counter bore. Features include a thick single cap ...
View full detailsThe Levelled stem is the mid rise (27mm) stem from BSD, the height is the same as our older Race stem. CNC machined from 6061-T6 this stem grips li...
View full detailsLadies and gentlemen, THE most iconic handlebars in all of BMX, the S&M Slam Bar. Copied the world over and yes bars have gotten bigger again o...
View full detailsThe new Terrible One Classic Handlebars are available now in a range of Rises and Colours 8' Rise - 28 Inch Wide 8.25" Rise - 28.5 Wide 8.5" Rise &...
View full detailsThe Stranger Haze is a quality, affordable forged 6061 Aluminium topload stem with CNC machined logos and a recessed fork cap area. Weight 0.306kg/...
View full detailsThe Relic DIY bars are a proper "man's bar" with a 9.35" rise, 30" width and straight gauge 4130 tubing. Relic is a über cool UK based BMX brand cr...
View full detailsMaterial: 6061-T6 alloy Colors: black, oil slick Features: high rise, top loading stem design, STC (Shark Tooth Clamping) inside the stem to help...
View full detailsThe Morrow stem is CNC machined from 6061 aluminium with a 28.5mm rise top load design and 48mm reach, internally machined body and top cap for red...
View full detailsThe Challenger stem from S&M is back friends... and yes, it’s exactly the same as the original. So obviously, this hunk of awesome is much too...
View full detailsThe small crossbar on these S&M Bikes Credence handlebars and 8.7" rise makes it just a relevant to an Oldschool build as it does on a up-to-th...
View full detailsRetro cruiser look bars with modern geometry. Add some style to your cruiser with these rad new 7" rise bars from S&M. Made in USA of course! R...
View full detailsUnited's resident heavy-hitter, Harry Mills-Wakley needed a set of bars up front that he could take a beating. These HMW handlebars are made from b...
View full detailsFinally some decent aftermarket bars for your 18" Juvi bike. 8 inch rise, 26.25 inc width and available in black or chrome. Made from 100% heat t...
View full detailsIf you liked the S&M Mike Hoder bars, but wish they were a bit higher... here you have the Hoder High bars! Same comfortable/strong design as t...
View full details9" / 9.420" / 9.65" rise28" wide, 11.5° back sweep, 3° upsweepBlack or Chrome
Animal Multi Butted Chromoly 4 pc Bars. • Post Weld Heat Treatment. • Rise: 9" • Width: 29" • Backsweep: 11° • Upsweep: 5° • Crossbar...
View full detailsThe all new 12 Step Bar from S&M features a 12" rise and is perfect for all those taller riders out there or any one looking to step it up in t...
View full detailsThe Box Two Top Load Stem is a modern 1-inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and ...
View full detailsAnimal Pop Off USA Made Stem Modern update of our classic Top load. 48mm reach. American made. Black, gold or raw.
By using custom butted alloy tubing, Radio were able to design the “perfect” Expert race handlebars with a 5.5 inch rise. Material 6061-T6 alloy T...
View full detailsThe Eclat Domain Topload Stem follows the clean simple lines of the frontload version. Constructed of 6061-T6 alloy, the Domain stem is fully CNC ...
View full detailsThe new Eclat Strangler four Piece Bars come in a choice of 9.1, 9,6 or 10 inch rise and are made from multi-butted heat-treated cro-mo tubing. The...
View full detailsLooking for a solid 10 inch 4 piece bar? Then look no further, the S&M 10 Inch Fu-Bars, made in USA, a full 30 inches wide and available in a f...
View full detailsOG S&M Bikes Slam Bars, a classic, still made in USA like they always were. These come with orginal Slam and Shield stickers, 8" x 28", chrome....
View full detailsWhy Choose between fashion or function when you can have both! The new Subrosa Rose Upload Stem features a shorter 48mm reach and a tall 36mm ris...
View full detailsCult's Alex Kennedy Signature are made from 100% heat-treated butted Chromoly to keep the strength up and the weight down, with pre-marked cut line...
View full detailsThe new Index front load stem from Wethepeople stem offers a taller 16mm rise, which allows you to run your bars as high as some topload stems, wit...
View full detailsThe Max Max is WeThePeople's new big handlebar with a 10.2" or new 11" rise and a whopping 30.5" width and is available in Regular 22.2 or Oversize...
View full detailsMaterial: 6061-T6 alloy, fully CNC machined Colors: black, oil slick, matt silver/red splash Features: front loading stem design, STC (Shark Toot...
View full detailsMaterial: 6061-T6 alloy, forged finish Color: black Features: front loading stem design, 40mm extension with central bore for reduced weight, speci...
View full detailsPrimo Richter Stem was designed with input from Nate Richter and made from forged aluminium with CNC machined external detailing. The width of the ...
View full detailsThe Primo Icon T/L Stem is a top load stem featuring a recessed compression bolt area along with an extra wide clamp area to improve grip on today'...
View full detailsGarrett didn’t want to cut his 8.75″ rise bars down in width anymore so we did the work for him with the width of his choice. Same proven heat tre...
View full details• Multi Butted Chromoly 4 pc bars with full post weld heat treatment. • Black or Chrome • Width - 28" • Rise - 8.25" • Backsweep - 11 • Upsweep - 5...
View full detailsLimited edition custom powder coated white Dyno Pretzel bars. Get twisted with the iconic GT Pretzel bar! Featuring a one-piece main bar with pretz...
View full detailsAt last a stem that does something different, Max Vu's top load stem from Cult has a tall 30.6mm rise and short 43mm reach, but the standout featur...
View full detailsNew brand-spanking new CNC top-loading Stem from Federal. Available in Silver or Black. Short 48mm Reach.
Animal Jump Off USA Made Stem, front load version. Modern update of the classic Animal Front load. 48mm reach. American made.
The Eclat Metra stem has a traditional topload design with a taller 30mm rise and a super wide faceplate with larger head bolts to prevent them fro...
View full detailsThe Eclat Morrow Bars are developed from Eclat's popular Dive bar, with changes to the bending, geometry and tubing thickness, which make these bar...
View full detailsThe We The People Logic Top Load stem comes with their patented shark tooth clamping knurling that keeps your bars locked in place, plus a wider 48...
View full detailsS&M's Made in USA 4 piece cro-mo bars pay homage to the 80’s and the glory days of cruiser racing! With modern materials and timeless geometry,...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions