Oxford/Darxide 22.2mm 15 Inch Seatpost Chrome
Long 15 inch (380mm), chrome plated Oxford/Darxide seat post in 22.2mm (7/8") diameter for your old school BMX bike. • Chrome plated. • 380mm (1...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Long 15 inch (380mm), chrome plated Oxford/Darxide seat post in 22.2mm (7/8") diameter for your old school BMX bike. • Chrome plated. • 380mm (1...
View full detailsDia-Compe Brake Lever Hoods Soft rubber cover Fits Diacompe 204/202 drop brake levers
Team grips combine features from the past (mushroom pattern) and the future (removable micro flanges) with a colour choice to suit all tastes inclu...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them....
View full detailsComplete genuine white Dia-Compe brake set with MX-890 calipers front and rear, left and right Tech-III brake levers and a front and rear genuine...
View full detailsDiaCompe MX1000 brakes are now available as a complete brakeset from Alans BMX with front and rear calipers, a pair of MX122 levers and front and a...
View full detailsThis has to be one of Haro's most iconic stems, The Hevron. Haro have now bring the stem back, this time so much lighter. Black or silver. 1 1/8" ...
View full detailsThe Fit Bike Co FAF Tyre features a street design directional tread pattern with micro-knurling for extra traction, it comes in 20 x 2.3 or 2.4 in...
View full detailsThe Profile Racing Euro threaded Euro BB ncludes LH & RH threaded cups, bearings (4), tube spacer, cone spacers (2), & aluminium spacers. ...
View full detailsSocial Mid BB, includes 2 bearings, end caps, centre spacer and extra spacer washers. Available in 22mm only.
Replace the small, slippery pedals on your kids race bike right now with these grippy 14 pin alloy Tioga DAZZ MX pedals that won't break the bank. ...
View full detailsNew issue Haro Lineage seat post clamp with a Peregrine flavour. Black or silver in 28.6mm to fit modern bikes with 25.4mm seatposts. As fitted ...
View full details• Hollow Star Nut & laser etched CNC alloy Cap. • Set with bolt. • Black 1 1/8"
This genuine Dia-Compe complete brake set in Black is perfect for your Old School BMX restoration. Comprising a pair of MX-890 caliper, left and ri...
View full detailsExactly the same as the Skyway BMX grips sold a few years ago. Kurled pattern. Closed end.
KMC Silver single 1/8" speed chain perfect for standard BMX use, will work equally well on your new school bike or a Raleigh Burner alike. Previo...
View full detailsSkyway's Tuff Wheels with 9T cassette version rear hub and 14mm axle to fit modern Freestyle BMX bikes. Fast, smooth, and reliable; these Tuffs exc...
View full details• Easily adjustable DXR brake lever for V-brakes, suited to the most demanding of BMX racing. • Features both reach and cable adjusters to tailor y...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them....
View full detailsThe Gusset EXP Euro BB kit uses sealed bearings with steel threaded cups and spacer kit for use with conventional English type threaded "Euro" 68mm...
View full detailsThe Dia-Compe Magic is a great priced cast alloy U brake caliper with high performance function. V-type soft pads. Dual Spring Tension adjustment...
View full detailsDiaCompe Tech77 "Potts" (182S) with thumb-lock stopper for freestyle balance tricks. • THE all time classic BMX lever but with a stopper. Sprung l...
View full detailsHigh power out put design Diecast aluminium bracket (Black finish) Cold forged aluminium lever handle (Silver finish) 2mm reach adjuster BRS retu...
View full detailsGenuine Dia-Compe upgrade Springs, pads and cover for the Hombre U-brake. • Green Hombre-pads• Low-profile aluminium spring tension adjuster.• St...
View full detailsOur best selling headset from the year 2000! Perfect for your Mid School whip or any frame that uses 1 1/8" press in cups 1 1/8” caged ball beari...
View full details13T Salt Plus Pro Freewheel for small thread (M30) hubs, in 13 tooth and right hand drive only. Material: hardened chromoly Size: 13t, M30 thread ...
View full detailsThe Snafu Magical fork is used by Hyper/Snafu Team and is constructed from heat-treated chromoly for maximum strength has a 30mm offset and comes i...
View full details2mm (tough) single ended genuine DiaCompe straddle cable with large easy grab nipple. • Designed for U-brakes. • 300mm long. • Price is for ONE ...
View full detailsProfile Racing's Old-Style BMX Spider is now available again. 5 arm 110BCD so fits old Sugino, SR & SunTour chainrings as well as our new Mirag...
View full detailsThe Geo XL is a complete Brake kit from from Saltplus. It contains everything you need to add a rear brake onto your bike* The geo lever & ...
View full detailsIt’s all in the name, ThickSlick. With a burly casing designed to withstand the roughest urban conditions paired with a slick tread design that p...
View full details• CNC machined from aircraft quality billet 6061 aluminium plate. • 4 bolt design. • 104mm BCD bolt pattern. • Made in USA. Weights: • 34t: 57g/2....
View full detailsShield Protectives are a new protection company and here are their shinpads. Available in sizes Extra Small to Large. Black only.
• Copy of the Dia-Compe MX-1000 copy brake sets, complete front and rear including left and right Tech-III style levers, front and rear MX-1000 typ...
View full detailsCNC machined from 7075 aluminium (7075 is harder wearing than the cheaper 6061 alloy) with 6 triangular holes and 5 rectangular holes to save we...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions