Tange Seiki MX320 Headset
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Old school BMX, everything to do with retro 80s and 90s bmx bikes. Parts, Frames, Complete Bikes all you need to restore your BMX bike.
Including GT, Haro, Dia-Compe, Panaracer, Neptune, Mirage, Skyway, Tioga, ODI, Haro, Profile, Tange, Nitto Bullseye, SE Racing, MCS, Raleigh, Diamond Back and more!
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsHaro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsDiaCompe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by Dia-Compe in black, blue, gold, red, silver or wh...
View full detailsDia-Compe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by DiaCompe in black, blue, gold, red, silver or wh...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsThe DiaCompe Bulldog is a high quality front caliper brake with reversed clamp/adjust for use with Potts mod cable routing (cable goes through stem...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe DiaCompe Bulldog is perfect for your old school ride or as an upgrade if you want a better quality caliper on your modern bike, available in b...
View full detailsThe classic 1980's MKS BM-7 alloy caged pedal is now available in 1/2" thread to fit one-piece cranks for your Raleigh Burner, Diamond Back Silver ...
View full detailsDiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full detailsQuality DiaCompe Bulldog brake that came out in the later 80's but is a great upgrade for all Old School BMX bikes or for the crummy caliper on the...
View full detailsThe Odyssey 1999 brake kit is a lightweight alloy brake kit perfect for those rebuilding that Old or Mid School BMX needing a caliper brake. This...
View full details• Alloy old school BMX style speed chainring.• 110BCD 5 arm design to fit old Sugino, SunTour and SR cranks/spiders and powerdiscs. Also fits mod...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full details• Top load old school stem, based on a classic 1980's SunTour Power Stem. • Chrome plated bolts and shaft. • Available in ED Black, Blue, Gold...
View full detailsThe classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full detailsOn the very first Robinson bikes that we built in February 1981, these MKS BM-7's are the very pedals we used, along with KKT Lightnings. • Highes...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full detailsIconic SunTour style design 1980's alloy seatclamp to fit most steel old school frames. • 25.4mm ID for use with 22.2mm seatpost on cro-mo frames...
View full detailsThe Wellgo BearTrap pedals are based on the classic SunTour XC-II pedals from 1981. The extra wide “bear trap” cages keep your feet exactly where t...
View full details• Left and right Tech-III style Dia-Compe copy brake levers. • Perfect for all 1980's BMX bikes. • Great value. • Black or Silver.
Now available from Alans BMX as a pair - genuine Dia-Compe classic Tech 4 (MX123) levers from the 1980's. Black, Blue, Gold, Red, Silver or White....
View full detailsGenuine old school BMX DiaCompe MX-122 BMX brake lever set, sold as a pair, left and right in Black or Silver. • These are a re-issue of the clas...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions