Tange MX-2 1 inch Threaded Old School BMX Headset
• Tange MX-2 headset to fit all oldschool BMX bikes with 1 inch threaded forks - including Raleigh Burner, Torker, GT, Haro, Mongoose, Diamond Back...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Old school BMX, everything to do with retro 80s and 90s bmx bikes. Parts, Frames, Complete Bikes all you need to restore your BMX bike.
Including GT, Haro, Dia-Compe, Panaracer, Neptune, Mirage, Skyway, Tioga, ODI, Haro, Profile, Tange, Nitto Bullseye, SE Racing, MCS, Raleigh, Diamond Back and more!
• Tange MX-2 headset to fit all oldschool BMX bikes with 1 inch threaded forks - including Raleigh Burner, Torker, GT, Haro, Mongoose, Diamond Back...
View full detailsThe classic hinged Old School BMX MX-1500N seat clamp has be remade by Dia-Compe, available now and it comes in 6 colours to choose from! • Fits a...
View full detailsPlated seat guts for your railed seat similar to the ones that Kashimax made in the 1980's. Bit of a faff to fit, but they always were ;) If you ar...
View full detailsThe definitive book on the history of BMX in the UK in the 80's, told by the kids that lived it. This isn't just another BMX book, it is the bible ...
View full detailsGenuine made in Japan Nitto chrome plated layback seatpost for most old school BMX bikes (22.2mm), 16.5mm long. Genuine Nitto Made in Japan. Not t...
View full detailsThe return of a legend. The iconic and best-selling BMX tyre of ALL TIME, the Comp III, is back! Two sizes: 1.75" (front or rear) or 2.125" (front)...
View full detailsLong 15 inch (380mm), chrome plated Oxford/Darxide seat post in 22.2mm (7/8") diameter for your old school BMX bike. • Chrome plated. • 380mm (1...
View full detailsDiaCompe MX1000 brakes are now available as a complete brakeset from Alans BMX with front and rear calipers, a pair of MX122 levers and front and a...
View full detailsProfile Racing's Old-Style BMX Spider is now available again. 5 arm 110BCD so fits old Sugino, SR & SunTour chainrings as well as our new Mirag...
View full details• Copy of the Dia-Compe MX-1000 copy brake sets, complete front and rear including left and right Tech-III style levers, front and rear MX-1000 typ...
View full detailsThe MX1000 brakes are now available as a complete brakeset from us comprising: • Dia-Compe MX1000 brakes: 1x Front. 1x Rear. Black. Complete ...
View full details• A re-issue of the original Comp-III with the original yellow hotpatch and skinwall sidewalls. Great for all Old School BMX restorations! • Sold h...
View full detailsYST 24tpi bottom bracket for all oold school BMX ne piece cranks EXCEPT early Mongoose and Ashtabula (they use 28tpi thread). Complete BB set, bea...
View full detailsDia-Compe now has the MX-1500 hinged seatclamp in 28.6mm clamp size to fit most modern BMX freestyle frames for that retro look. DOES NOT FIT OLD S...
View full detailsGenuine DiaCompe MX-1000 brakes are now available from ALANS BMX as a complete brakeset with Tech-III levers and Dia-Compe cables. Set includes: •...
View full detailsThe legendary Dia-Compe MX-1000 brakes are now available in blue from ALANS BMX as a complete brake set comprising with Tech-4 levers and genuine D...
View full detailsGot a BMX bottom bracket shell on your frame but want to run an MTB BB? Spend 10mins. fitting these Wonder Cups and you are sorted. The latest ve...
View full details"An important part of BMX freestyle history" - Bob Haro "One of the most talented--and youngest--photographers in BMX" - John Ker/BMX PLUS! 424 pag...
View full detailsGenuine DiaCompe MX128 Tech-VI old school BMX brake levers. These use the same type of banded calmp as the earlier levers but have a longer lever b...
View full detailsThis genuine Dia-Compe complete front and rear brake set up in Blue is perfect for your Old School BMX restoration. Comprising a pair of MX-890 ...
View full detailsComplete red anodised old school brake set available from ALANS BMX with DiaCompe MX-1000 calipes, Tech-IV levers and genuine Dia-Compe cables, fro...
View full detailsIn 1982, MKS released the GRAFIGHT-X, which became popular amongst freestyle BMX riders. Since it went out of production, MKS have received many re...
View full detailsThe MX1000 brakes are now available as a complete brakeset from us. • Dia-Compe MX1000 brakes: 1x Front. 1x Rear. Blue. Complete with all mou...
View full detailsALANS BMX bring you a complete Gold DiaCompe MX-1000 brakeset with front and rear calipers, bake levers and genuine black Dia-Compe cables. • N...
View full detailsGood quality, water resistant low cost conventional BMX Bottom Bracket for One Piece BMX Cranks. Adjustable looseball bearings. Water Resistant p...
View full detailsThe MX1000 brakes are now available as a complete brakeset from us comprising: • New Dia-Compe MX1000 brakes: 1x Front. 1x Rear. Gold. Complete wi...
View full detailsWant to convert your 10mm ACS BOA brake to the standard 6mm fitment? Or do you want to swap your ACS BOA to Front or Rear? Seventies made some bran...
View full detailsComplete genuine Dia-Compe brake set with Gold MX-890 calipers front and rear, left and right Tech-III brake levers and front and rear genuine Dia-...
View full detailsVictor VP 747 1980's style Bear Trap caged alloy old school BMX pedals based on the SunTour XC-II pedals from 1981. Alloy body and alloy cage. Lo...
View full detailsFinally we have 1 inch OLD SCHOOL Gyro kits in stock! Material: steelColour: blackFeatures: comes with upper and lower rotor-cable, comes with ex...
View full detailsLoose ball 24tpi American BB for all one piece cranks (apart from 28tpi Ashtabula/Mongoose one piece cranks). Weight 314g (0.69lb / 11.08oz) Black
The MX1000 brakes are now available as a complete brakeset from us in Blue. • Dia-Compe MX1000 brakes: 1x Front. 1x Rear. Blue. Complete with ...
View full detailsGreat value complete Dia-Compe brake kit for Old School BMX bikes comprising: • Front and rear Bulldog caliper brake. Front is regular type - if y...
View full detailsThe legendary old school BMX DiaCompe MX1000 brakes are now available as a complete brakeset from us comprising: • Dia-Compe MX1000 brakes: 1x Fro...
View full detailsPerformance aluminium MTB type brake lever with switchable cable pull - suitable for most types of cable brakes, including Disc brakes, side pull c...
View full detailsThe legendary Dia-Compe MX-1000 brakes are now available from ALANS BMX as a complete brake set in White with Tech-4 brake levers comprising: • ...
View full detailsComplete genuine white Dia-Compe brake set with MX-890 calipers front and rear, left and right Tech-III brake levers and a front and rear genuine...
View full detailsThis genuine Dia-Compe complete brake set in Black is perfect for your Old School BMX restoration. Comprising a pair of MX-890 caliper, left and ri...
View full detailsExactly the same as the Skyway BMX grips sold a few years ago. Kurled pattern. Closed end.
Complete genuine Dia-Compe brake set in Red with MX-890 calipers front and rear, left and right Tech-III berake levers and a front and rear genuien...
View full detailsGenuine all-black DiaCompe brake set with MX-890 calipers front and rear, left & right MX122 brake levers and front & rear genuine Dia-Comp...
View full detailsOld school cruiser handlebars are hard to find but now we have these awesome Nitto 5.5" bars perfect for your old 80's BMX cruiser, made in Japan f...
View full detailsGenuine Raleigh sticker set as fitted to the 2023 limited edition Raleigh Tuff Burner. Complete set for frame and fork printed on clear vinyl. Ve...
View full detailsGenuine MKS chain tensioners, Made in Japan. Patented chain adjustersHub Spindle Dia: 10mmPairs Dropout Thickness: 5 mm / 8mmNJS/Keirin approvedMa...
View full detailsDiacompe DC 988 Cold forged low profile with dual spring adjust.Great for CX bikes.Fits front or rear.
Dia-Compe 750 Centre Pull Brake as used on 1988 GT Performer, Kuwahara KZ-2, etc. Fits on the frame brake bridge where a regular caliper would, s...
View full detailsFor the first time ever! The soft, grippy neoprene donuts you love with officially licensed CW Racing logos. Imported from the company that inve...
View full details• Shafted Profile Racing stem. • Fits Oldschool bikes with 1 inch threaded forks. • Great if you want to run a longer stem to make your Oldschoo...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions