If you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
• Replacement driver for Odyssey Hazard hubs. • 3 pawl type (pawls not included, available extra). • Bearings included.
Federal V3 Freecoaster Slack Washers, fits most KHE style internal Freecoasters to reduce the amount of gap when you pedal. Comes with 3 washers a...
View full details
Profile Elite 9 tooth RHD driver for use Profile Elite hubs.Chromoly. Fits Profile Elite hubs only Does NOT include springs and pawls (these sold s...
View full details
• These allow you to use female bolt-type 10mm cassette hub on your frame with 14mm dropouts, for that clean look. Can also be used on the front ...
View full details
Single replacement Profile Racing pawl and spring for Mini, Totem or Elite cassette hubs. • Sold as individual Pawl or Spring • These pawls & ...
View full details
Profile Elite splined alloy driver for use with Profile cogs. Fits Profile Elite hubs only Does NOT include springs and pawls (these sold seperately)
14mm Metric rear hub bolts to replace your worn out bolts in your WTP Supreme Hub. Sold in pairs
Replacement engagement clutch cone piece for Clutch v2 freecoaster hub. Available in either Right or Left hand drive.
Replacement 9-tooth chromoly driver for the Clutch v2 freecoaster hub. Includes needle bearing and collar. Available in either Right or Left hand ...
View full details
Replacement non-drive side circlip for Clutch v1/v2 freecoaster hub. 35mm.
Replacement slack adjuster screw for Clutch v1/v2 freecoaster hub. Use 2.5mm hex key.
Replacement non-drive side collar for Clutch v1/v2 freecoaster hub. Black only.
4 Prong Track Lockring in Reverse LH Thread. Fits GT Speed Series Hubs that use the 3 prong LH thread longrings 1.29" x 24T thread pitch Basic, sim...
View full details
• Manufactured at Profile Racing's U.S.A. plant using aerospace grade titanium (lighter than chromoly). These CNC machined cassette driver...
View full details
Spare parts for the GSport Roloway hubs including Axles, Hub Bolts, and collars only in black 3/8 bolt is same as 10mm bolt 14mm bolts f...
View full details
• Replacement left & right cone nuts to suit Colony Clone cassette hubs.
• If your driver is tight on your profile hub then this washer will fix your issue. It spaces the driver out from the bearing in the hubshell givin...
View full details
Great replacement hub bolts 17mm socket and 6mm allen key. Fits standard 10mm Metric hubs from almost every brand excluding Profile/Madera
Replacement drive side collar for Clutch v2 freecoaster hub.
Profile Bearing Kit for Front or Rear Race, SS, Mini, Elite, Totem and Mini Lite hubshells only. Does NOT include driver bearings 2 x bearings incl...
View full details
• This is a conversion kit for Mini, Totem, and Madera V2 Cassette from the 3/8" (10mm) 3 piece axle to the 14mm Gun Drilled Hollow axle....
View full details
Replacement plastic slack helical adjuster for Clutch v1/v2 freecoaster hub. 2 pieces.
Fits Profile Hubshells (NOT drivers) and some others: 17MM ID x 30MM OD x 7MM W)For Profile Mini, Totem, Elite Bmx, Elite MTB, & Classic...
View full details
• Manufactured at Profile Racing’s U.S.A. plant using aerospace grade titanium (stronger than chromoly). • FIts Profile Mini and Totem cassette h...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions
