Dia-Compe MX1000 Black Complete Brake Set with Dia-Compe Cables
The MX1000 brakes are now available as a complete brakeset from us comprising: • Dia-Compe MX1000 brakes: 1x Front. 1x Rear. Black. Complete ...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Old school BMX, everything to do with retro 80s and 90s bmx bikes. Parts, Frames, Complete Bikes all you need to restore your BMX bike.
Including GT, Haro, Dia-Compe, Panaracer, Neptune, Mirage, Skyway, Tioga, ODI, Haro, Profile, Tange, Nitto Bullseye, SE Racing, MCS, Raleigh, Diamond Back and more!
The MX1000 brakes are now available as a complete brakeset from us comprising: • Dia-Compe MX1000 brakes: 1x Front. 1x Rear. Black. Complete ...
View full detailsFlite invented the grip donut. These are exactly the same as the originals from the early 80's made with the same neoprene and materials, available...
View full detailsClassic checkered three piece Old School BMX padset made in Southern California using the original patterns, foam and nylon. The classic nylon 3 ...
View full detailsWhy sweat fitting tyres to your Skyways when you can buy the whole caboodle from us with beautiful re-issue Panaracer HP406 tyres installed and inf...
View full detailsBack in to 80's the only chains we ran on our Robinson and Torker race bikes were Izumi and DID. Tom here used Izumi back in NZ and swears by them...
View full detailsGenuine old school BMX DiaCompe MX-122 BMX brake lever set, sold as a pair, left and right in Black or Silver. • These are a re-issue of the clas...
View full detailsGenuine 1980's Made-in-Japan Suzue front hub axle for Suzue sealed bearing hubs (will not fit the loose ball hubs). 3/8" (10mm) 26tpi Cones, lock...
View full detailsMade in the USA from the same company that made them over 40 years ago, A'ME Full Waffle MX style grips are a BMX classic for maximum traction, ava...
View full details• High quality stainless steel. • For Single chainrings. • 6.5mm length. • Set of 5. "
1 inch threaded VP-H755 headset from VP, perfect for Old School BMX frames, now available in black. Black. 32.5mm diameter bearing cups (where th...
View full detailsNew Skyway 20" Tuff wheels with sealed bearings, sold a pair front and rear with a coaster brake for your old school freestyle BMX restoration. • ...
View full detailsThe legendary Handler by Kashimax, first released in 1987, is back! Made in Japan, just like they always have been. The Kashimax Handler FS featur...
View full detailsAmazing anodised checkered grip donuts imported from the company that invented them back in the 80's - Flite. Still handmade in USA, these are the ...
View full detailsSkyway have recreated the iconic Gold alloy riveted flange design of the early 80's Tuff II Wheels with with upgraded modern sealed bearings to giv...
View full detailsFinally the time has come, 1988 is the first year that Haro made the 4 piece Kneesaver bars, although they originally just referred to them as "Pro...
View full detailsIf you have an old school frame with a flat brake bridge like a Raleigh Burner, Robinson, Torker, etc (rather than a tubular one) instead than usin...
View full detailsUSA Made Neptune BMX cross style sprocket influenced by the original Redline Flight Crank sprockets of the early 80's. We have used these on quite ...
View full details7 spoke 24 inch versions of the legendary Skyway Tuff Wheels available in black, blue, red, white or yellow with sealed bearings for your 24" Old ...
View full detailsSuper quality Nitto BMX handlebars, still made in Japan from 4130 cro-mo tubing and great for all old school BMX restorations like GT, Raleigh Burn...
View full details• Hallelujah! Old school BMX builders can rejoice, the Redline Flight cranks are finally available again to complete your retro build. Iconic Red...
View full details• Protect the grill, knees and huevos all in one set.• Genuine S&M!• 3 piece pad set.• Nylon/Velcro Wrap.• Foam padding.• Great value.
Dia-Compe have remade the old type brown brake blocks that originally came on MX-1000, MX900, MX890, MX1020, etc caliper brakes! Sold as a pair. T...
View full detailsGenuine GT BMX American size bottom bracket for 22mm spindles. Fits GT Power Series alloy cranks. Alloy cups. Sealed 22mm bearings. Spacers, bea...
View full detailsGenuine Skyway Tuff Wheel hub Sealed Bearing axle rebuild kit including, axle, bearings, cones, etc. For one wheel only, front or rear. Comes with...
View full detailsThe original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full detailsWe are very priviledged to have Mr. Kashima specially make these padded suede Aero seats for us here at ALANS BMX. It is quite likley we willl neve...
View full detailsBeautifully made genuine Haro precision CNC machined 6061 T6 alloy construction screw-on axle pegs. Add the final touch to your vintage freestyle ...
View full detailsBefore the Tech-III that everyone knows, came, unsurprisingly, the Dia-Compe Tech 2. Designed to sit on the upright/bend of your bars. • Lightweig...
View full detailsFlite pads plain with the original 1980's logo, made in USA, are the only choice when you want the finishing touch for your old school BMX restora...
View full detailsRetro-American cups and bearings for your Profile Racing 3-Piece Race Style Crank set - comes with flat cups, sealed bearings, tube spacer and alum...
View full detailsGenuine MKS replacement spindles for MKS BM-7 pedals. Made in Japan. 1/2" for all one piece cranks (silver). 9/16" for all three piece cranks (chr...
View full detailsReplacement Redline Flight crank arm stickers. Gen 1 or Gen 3. Price is for two stickers (one for each arm).
Loose ball 24tpi American BB for all one piece cranks (apart from 28tpi Ashtabula/Mongoose one piece cranks). Weight 314g (0.69lb / 11.08oz) Black
Weldtite Bottom Bracket Caged Bearings for One Piece cranks. For use with loose ball American Bottom brackets and One Piece Cranks. Pair of caged b...
View full detailsThe SE 12 o'clock pedals feature a low profile design with ten traction pins for fantastic grip as you nail your favourite tricks. SE Bikes has als...
View full detailsThe Profile Racing Slim Jim Seat Post Clamp is made in the USA, here in 25.4mm size to fit most 80's Old School BMX bikes. Machined from 6061 Alum...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions